- 1-807-228-1532
- support@dnb3d.ca
Free shipping on orders over $175
New Products added Daily
Ready to Ship | Father’s Day Gifts | Custom Orders
Durable Volcano Stainless Steel Nozzle V6 for 1.75mm filament, E3D Volcano-style hotends, high-flow printing, draft parts, prototypes, and everyday 3D printer maintenance.
$4.95
Volcano Stainless Steel Nozzle V6 is designed for compatible E3D Volcano-style hotends using 1.75mm filament. This stainless steel nozzle is built for high-flow filament applications where a larger melt zone, faster material output, and improved print speed are important. It is a practical replacement or upgrade option for everyday 3D printing, draft parts, prototypes, larger prints, and general printer maintenance.
Your current dnb3D product page lists this nozzle in four size options: 0.2mm, 0.4mm, 0.6mm, and 0.8mm. This gives printer owners flexibility when choosing between fine detail, standard printing, and larger nozzle sizes for faster material flow. The page also notes that this nozzle is rated to a maximum temperature of 300°C and is designed to improve print quality and speed.
Volcano-style nozzles are longer than standard V6-style nozzles and are designed to support increased melt capacity. This makes them useful when printing larger parts, stronger functional pieces, thicker layers, or faster draft profiles. When paired with a compatible Volcano-style hotend, the larger melt zone can help maintain more consistent extrusion during higher-flow printing.
This Volcano Stainless Steel Nozzle is intended for compatible E3D Volcano-style hotends using 1.75mm filament. Before ordering or installing, confirm your hotend type, thread compatibility, nozzle length, heater block style, and filament diameter. A nozzle that does not match the hotend can cause leaks, poor heat transfer, clogging, or heater block damage.
The 0.2mm option is useful for finer detail and smaller features, but it usually requires slower printing. The 0.4mm size is a common everyday choice. The 0.6mm and 0.8mm sizes can help increase flow and reduce print time for larger functional parts, brackets, jigs, fixtures, prototypes, and draft prints. When changing nozzle size, update slicer settings such as nozzle diameter, line width, layer height, flow rate, speed, and temperature.
Stainless steel nozzles can be useful where cleaner material compatibility, corrosion resistance, or non-brass nozzle material is preferred. Compared with standard brass nozzles, stainless steel generally has lower thermal conductivity, so small temperature or speed adjustments may be needed depending on your printer, filament, and slicer profile.
This Volcano Stainless Steel Nozzle is listed as rated to a maximum temperature of 300°C. Always stay within the safe operating limits of your hotend, thermistor, heater cartridge, nozzle material, and filament. Printing near the upper end of any component’s temperature range should be done carefully and only with a properly configured printer.
For related components, browse the 3D Printer Parts category or the Nozzles category. This nozzle can be paired with heater blocks, silicone socks, heat breaks, thermistors, extruders, and other 3D printer maintenance hardware from dnb3D.
Volcano-style nozzles are designed for higher-flow printing applications where larger melt zones, larger nozzle sizes, and increased material output are useful. For compatibility, dimensions, hot tightening, and nozzle care information, see the E3D Volcano nozzle technical reference.
Every order is hand-inspected and precision-shipped from dnb3D in Marathon, Ontario. Whether you are replacing a worn nozzle, tuning a larger nozzle profile, improving high-flow printing, or stocking spare 3D printer maintenance parts, this Volcano Stainless Steel Nozzle V6 provides a durable option for compatible 1.75mm Volcano-style hotends.
Volcano Stainless Steel Nozzle V6 is a high-flow nozzle for compatible E3D Volcano-style 3D printer hotends using 1.75mm filament.
| Product Type | 3D printer nozzle / Volcano-style stainless steel nozzle |
|---|---|
| Nozzle Style | Volcano V6-style high-flow nozzle |
| Filament Diameter | 1.75mm |
| Material | Stainless steel |
| Available Nozzle Sizes | 0.2mm, 0.4mm, 0.6mm, 0.8mm |
| Compatible Hotends | Compatible E3D Volcano-style hotends |
| Maximum Temperature Rating | 300°C |
| Melt Zone | Large melt zone for high-flow and higher-speed printing applications |
| Thermal Note | Stainless steel generally has lower thermal conductivity than brass; temperature or speed tuning may be required. |
| Recommended Filaments | PLA, ABS, PETG, TPU, and similar compatible 1.75mm filaments |
| Common Applications | High-flow 3D printing, everyday printing, draft parts, prototype parts, larger nozzle profiles, printer maintenance, PLA, ABS, PETG, and TPU printing |
| SKU | DB-0715-7604 |
| Installation Warning | Confirm Volcano hotend compatibility before installation. Install carefully to avoid cross-threading, hotend leaks, or heater block damage. |
| Fulfillment | Hand-inspected and precision-shipped from dnb3D in Marathon, Ontario, Canada |
Before installing the Volcano Stainless Steel Nozzle V6, confirm that your printer uses a compatible E3D Volcano-style hotend for 1.75mm filament. Check hotend type, thread compatibility, nozzle length, heater block style, and filament diameter before installation.
Start the nozzle by hand whenever possible. If the nozzle does not thread in smoothly, stop and check alignment. Cross-threading can damage the stainless steel nozzle, heater block, or hotend assembly.
Many hotends require the nozzle to be tightened at printing temperature so the nozzle seals correctly against the heat break. Follow your printer or hotend manufacturer’s procedure. Use controlled torque and avoid over-tightening to prevent hotend leaks or heater block damage.
Stainless steel generally transfers heat differently than brass. If you are switching from a brass nozzle, test your print settings and adjust temperature, speed, flow, or retraction if needed. Watch for under-extrusion, poor layer bonding, or inconsistent flow when changing nozzle material or nozzle size.
When switching between 0.2mm, 0.4mm, 0.6mm, and 0.8mm nozzle sizes, update your slicer settings. Check nozzle diameter, line width, layer height, flow rate, speed, temperature, and retraction settings. A larger Volcano nozzle may also require higher flow tuning depending on material and printer capability.
This nozzle is listed with a maximum temperature rating of 300°C. Do not exceed the safe limits of your nozzle, hotend, thermistor, heater cartridge, heat break, PTFE path if present, or filament. High-temperature printing should only be done on a properly configured printer.
Keep the nozzle tip free from burnt filament, debris, and residue. Use appropriate cleaning methods for your filament and printer. Avoid aggressive scraping that could damage the nozzle tip or sealing surface.
If prints show inconsistent extrusion, poor surface finish, under-extrusion, blobs, stringing, or dimensional issues after tuning, inspect the nozzle for wear or clogging. Replacing a worn nozzle is often faster and more reliable than trying to recover a badly damaged one.
Every order is hand-inspected before shipping. dnb3D precision-ships 3D printer nozzles, hotend parts, and maintenance hardware across Canada from our Ontario facility, helping makers, builders, and printer owners receive clean, usable parts ready for careful installation.
At dnb3D, we don’t just ship boxes—we manufacture solutions. Operating our Industry 4.0 micro-factory in Marathon, Ontario, means your order is handled by the same people who design and test these components.
Ready to Ship (3D Printer Parts & Hardware): Finished, inspected, and on the shelf. Dispatched within 1 to 2 business days.
In-House Manufacturing (Laser, Plasma, 3D Prints): These items are manufactured “fresh” to order. Please allow 3 to 5 business days for precision cutting and finishing.
Custom Projects: Bespoke designs require a consultation and a locked-in timeline before production begins.
We ship nationwide across Canada and the USA. Centrally located on the North Shore of Lake Superior, we are uniquely positioned to get your products moving quickly to either coast.
We stand behind every weld, cut, and print. If a product doesn’t meet your expectations, contact the Hub within 30 days. If we wouldn’t put it in our own shop, we won’t let it sit in yours.
Standard Items: Contact us within 30 days for return authorization. Items must be in original, unused condition.
Custom/Personalized Orders: Digitally fabricated to your exact specs (names, custom dimensions, or unique finishes) are final sale once production begins.
Shipping Costs: Return shipping is the responsibility of the customer unless the item arrived damaged or defective.
Have questions about a specific build? Click here to contact the shop.
