- 1-807-228-1532
- support@dnb3d.ca
Free shipping on orders over $175
New Products added Daily
Ready to Ship | Father’s Day Gifts | Custom Orders
Top Mounted C14 Power Socket with illuminated switch and integrated fuse holder for compatible electronics, control boxes, 3D printers, CNC machines, power enclosures, monitors, computers, and workshop equipment. Rated for 10A 250V AC, this non-pre-wired module provides a clean switched IEC C14 power-entry point for compatible builds.
$11.99
This Top Mounted C14 Power Socket is a fused IEC power-entry module designed for compatible electronics, control boxes, 3D printers, CNC machines, shop equipment, and custom electrical enclosures. It combines an IEC C14 inlet, illuminated switch, and integrated fuse holder in a compact top-mounted format.
This version is not pre-wired, making it different from the pre-wired C14 fused power socket option. It is intended for builders who need this mounting style and prefer to complete their own wiring based on the requirements of the enclosure, power supply, and equipment being assembled.
The built-in illuminated switch provides a visible power-control point, while the integrated fuse holder allows the circuit to use the appropriate compatible glass fuse. The current product page lists the module rating as 10A 250V AC and lists fuse details as 250VAC 6.3A 2.5W. Always verify the correct fuse type and rating for your specific equipment before installation.
The Top Mounted C14 Power Socket is useful for compatible electronics enclosures, 3D printer power boxes, CNC machine control boxes, computers, printers, monitors, televisions, bench electronics, and workshop equipment that require a switched IEC C14 power inlet.
This socket is designed to accept a compatible IEC C13 power cord. The C13 1.5m Power Cord is sold separately and can be used with compatible C14 power inlets.
Because dnb3D carries more than one C14 socket style, confirm that this top-mounted version matches your enclosure cutout, mounting method, and layout before ordering. If you need the pre-wired version, choose the pre-wired C14 fused power socket instead.
For general IEC C13/C14 connector identification, you can review this IEC C13 and C14 connector reference. Always follow proper electrical safety practices and confirm all ratings before installing AC power components.
This is an AC electrical component intended for compatible equipment and enclosures. Installation should be performed only by someone familiar with AC wiring, grounding, fusing, insulation, strain relief, and safe electrical practices. Incorrect wiring can cause equipment damage, electric shock, fire risk, or injury.
Each order is handled by dnb3D in Marathon, Ontario, Canada. This top mounted C14 power socket is a useful part for compatible electronics, machine builds, control boxes, and repair projects.
Below are the confirmed specifications for this Top Mounted C14 Power Socket. Always verify voltage, current, fuse rating, wiring, and enclosure compatibility before installation.
| Product Name | Top Mounted C14 Power Socket |
|---|---|
| Product Type | Top mounted IEC C14 fused power inlet / switched power socket module |
| SKU | DB-0051-5912 |
| Power Inlet Type | IEC C14 / IEC 320 style power inlet |
| Mounting Style | Top mounted |
| Wiring | Not pre-wired |
| Switch Type | Illuminated switch |
| Fuse Holder | Integrated glass fuse holder |
| Voltage / Current Rating | 10A 250V AC |
| Fuse Details Listed | 250VAC 6.3A 2.5W |
| Leakage Current | 1mA |
| Current Resistance | ≤50MΩ |
| Compatible Cord Type | IEC C13 power cord, sold separately |
| Common Applications | Compatible electronics enclosures, control boxes, computers, printers, 3D printers, CNC machines, monitors, televisions, power supplies, and machine hardware |
| Quantity Sold | 1 top mounted C14 power socket module per quantity unless otherwise listed |
| Installation Warning | AC electrical component. Confirm voltage, current, fuse rating, grounding, wire routing, insulation, strain relief, and enclosure compatibility before installation. Incorrect wiring may cause electric shock, fire risk, equipment damage, or injury. |
| Fulfillment | Hand-inspected and precision-shipped from dnb3D in Marathon, Ontario, Canada |
Before installing this Top Mounted C14 Power Socket, confirm that your equipment, enclosure, and power system are designed for a top mounted IEC C14 fused inlet module rated at 10A 250V AC. Check the required enclosure cutout, mounting style, current rating, fuse type, grounding method, and wiring layout before use.
This product is an AC electrical component and is not pre-wired. Installation should only be performed by someone familiar with safe AC wiring practices. Disconnect power before installation or servicing. Incorrect wiring can create electric shock, fire risk, equipment damage, or personal injury.
The product page lists fuse details as 250VAC 6.3A 2.5W. Always verify the correct fuse type and erage for your specific equipment before powering the device. Never bypass the fuse holder or install an incorrectly rated fuse.
Because this socket is not pre-wired, all live, neutral, and ground connections must be completed correctly for the application. Use suitable terminals, insulation, strain relief, and enclosure protection. Make sure all connections are tight and protected from vibration, sharp edges, heat, and moving parts.
Install the socket into a compatible top-mounted enclosure cutout and ensure the module is seated securely. The inlet should not move, flex, or expose wiring during normal use. Test the illuminated switch and power connection only after confirming all wiring and grounding are complete.
This module is designed to accept a compatible IEC C13 power cord. Use only undamaged, properly rated cords that match your equipment and local power requirements.
Inspect the socket, switch, fuse holder, terminals, and wiring periodically. Do not use the module if the housing is cracked, the switch is loose, the fuse holder is damaged, or wiring shows signs of heat, wear, looseness, or damage.
Each order is checked before fulfillment and precision-shipped from dnb3D in Marathon, Ontario, Canada.
At dnb3D, we don’t just ship boxes—we manufacture solutions. Operating our Industry 4.0 micro-factory in Marathon, Ontario, means your order is handled by the same people who design and test these components.
Ready to Ship (3D Printer Parts & Hardware): Finished, inspected, and on the shelf. Dispatched within 1 to 2 business days.
In-House Manufacturing (Laser, Plasma, 3D Prints): These items are manufactured “fresh” to order. Please allow 3 to 5 business days for precision cutting and finishing.
Custom Projects: Bespoke designs require a consultation and a locked-in timeline before production begins.
We ship nationwide across Canada and the USA. Centrally located on the North Shore of Lake Superior, we are uniquely positioned to get your products moving quickly to either coast.
We stand behind every weld, cut, and print. If a product doesn’t meet your expectations, contact the Hub within 30 days. If we wouldn’t put it in our own shop, we won’t let it sit in yours.
Standard Items: Contact us within 30 days for return authorization. Items must be in original, unused condition.
Custom/Personalized Orders: Digitally fabricated to your exact specs (names, custom dimensions, or unique finishes) are final sale once production begins.
Shipping Costs: Return shipping is the responsibility of the customer unless the item arrived damaged or defective.
Have questions about a specific build? Click here to contact the shop.
