- 1-807-228-1532
- support@dnb3d.ca
Free shipping on orders over $175
New Products added Daily
Ready to Ship | Father’s Day Gifts | Custom Orders
Bi-Material Lead Screw Decoupler for compatible 8mm lead screw and Z-axis assemblies. This decoupler is used to help isolate lead screw drivetrain inconsistencies from the print surface in supported 3D printer motion systems, including Rat Rig V-Core 3.1 style Z bed arm assemblies.
$23.95
This Bi-Material Lead Screw Decoupler is designed for compatible 8mm lead screw and Z-axis assemblies where drivetrain isolation is important. The part is commonly associated with Rat Rig V-Core 3.1 style bed arm assemblies, where it helps reduce the transfer of lead screw inconsistencies into the print surface.
A lead screw decoupler is used to separate or isolate part of the motion system so unwanted lead screw wobble, drivetrain inconsistency, or alignment error is less likely to transfer directly into the bed or print surface. Rat Rig describes its bi-material decouplers as being used on the V-Core 3.1 Z arms to help prevent drivetrain inconsistencies from being transmitted to the print surface.
The current product title says “Decoupler Bi-Metal 8mm,” but Bi-Material Lead Screw Decoupler – 8mm is clearer and more accurate for customers. It identifies the function, lead screw application, and 8mm compatibility in a more searchable way.
This decoupler is intended for compatible 8mm lead screw assemblies, Z-axis motion systems, bed arm assemblies, and printer builds that call for this style of lead screw decoupler. Always confirm your build guide, screw size, mounting pattern, and required quantity before ordering.
The current dnb3D product page lists this item for the Rat Rig V-Core 3.1 Z bed arm assembly and says 3 pieces are required for that listed application. The Rat Rig Z-axis assembly guide also shows 3 bi-material lead screw decouplers used during lead screw decoupler preparation.
The current product page also includes a line saying 4 are used on the Rat Rig V-Core 3.1 series. To avoid customer confusion, the listing should be corrected to focus on the specific sold application. For the listed Z bed arm / Z-axis assembly use, use 3 pieces required.
For build-specific context, review the official Rat Rig V-Core 3.1 Z-Axis Assembly Guide, which shows the bi-material lead screw decoupler used with the lead screw nut during Z-axis assembly.
If you are sourcing additional motion components, browse our Hardware category or our 3D Printer Parts category for related couplers, bearings, fasteners, electronics, and motion-system parts.
Each order is handled by dnb3D in Marathon, Ontario, Canada. This 8mm lead screw decoupler is useful for compatible Z-axis repairs, motion-system maintenance, printer builds, and bed arm assembly work.
Below are the confirmed specifications and recommended cleanup notes for this Bi-Material Lead Screw Decoupler. Always verify lead screw size, build guide requirements, mounting pattern, and required quantity before ordering.
| Product Name | Bi-Material Lead Screw Decoupler – 8mm |
|---|---|
| Current Page Name | Decoupler Bi-Metal 8mm |
| Product Type | Lead screw decoupler / Z-axis decoupling component |
| SKU | DB-0562-6766 |
| Lead Screw Compatibility | Compatible 8mm lead screw assemblies |
| Material Description | Bi-material construction — verify exact materials before publishing detailed material claims |
| Common Applications | Compatible Z-axis assemblies, bed arm assemblies, 3D printer motion systems, lead screw decoupling, and drivetrain isolation applications |
| Listed Printer Application | Rat Rig V-Core 3.1 Z-axis / Z bed arm assembly |
| Quantity Required for Listed Application | 3 pieces required for the listed Z-axis / bed arm application |
| Quantity Sold | 1 lead screw decoupler per quantity unless otherwise listed |
| Installation Warning | Confirm lead screw size, mounting pattern, build guide requirements, fastener compatibility, and quantity before installation. Do not overtighten fasteners into printed or delicate components. |
| Fulfillment | Hand-inspected and precision-shipped from dnb3D in Marathon, Ontario, Canada |
Before installing this Bi-Material Lead Screw Decoupler, confirm that your build guide, Z-axis assembly, or bed arm assembly calls for an 8mm lead screw decoupler of this style. Check the required quantity, mounting pattern, fasteners, and lead screw nut compatibility before ordering or installation.
Install the decoupler according to your printer or machine assembly guide. For Rat Rig V-Core 3.1 style applications, the decoupler is used with the lead screw nut during Z-axis assembly. Align parts carefully and make sure fasteners thread cleanly before tightening.
Do not overtighten fasteners during installation. Excessive force may damage printed parts, threads, inserts, decoupler mounting points, or related hardware. Tighten evenly and only as required for secure assembly.
A lead screw decoupler is intended to help reduce unwanted drivetrain influence on the bed or motion platform. Final print quality still depends on proper lead screw alignment, frame squareness, bearing condition, nut installation, bed arm alignment, and overall machine calibration.
Keep the decoupler clean and dry before installation. Avoid dropping it, scratching mating surfaces, contaminating threaded areas, or storing it loose with abrasive hardware that may damage the component.
If your Z-axis develops binding, wobble, uneven movement, visible layer artifacts, or unusual mechanical noise, inspect the decoupler, lead screw nut, bed arms, fasteners, lead screws, bearings, and related motion components. Replace damaged or worn parts as needed.
Each order is checked before fulfillment and precision-shipped from dnb3D in Marathon, Ontario, Canada.
At dnb3D, we don’t just ship boxes—we manufacture solutions. Operating our Industry 4.0 micro-factory in Marathon, Ontario, means your order is handled by the same people who design and test these components.
Ready to Ship (3D Printer Parts & Hardware): Finished, inspected, and on the shelf. Dispatched within 1 to 2 business days.
In-House Manufacturing (Laser, Plasma, 3D Prints): These items are manufactured “fresh” to order. Please allow 3 to 5 business days for precision cutting and finishing.
Custom Projects: Bespoke designs require a consultation and a locked-in timeline before production begins.
We ship nationwide across Canada and the USA. Centrally located on the North Shore of Lake Superior, we are uniquely positioned to get your products moving quickly to either coast.
We stand behind every weld, cut, and print. If a product doesn’t meet your expectations, contact the Hub within 30 days. If we wouldn’t put it in our own shop, we won’t let it sit in yours.
Standard Items: Contact us within 30 days for return authorization. Items must be in original, unused condition.
Custom/Personalized Orders: Digitally fabricated to your exact specs (names, custom dimensions, or unique finishes) are final sale once production begins.
Shipping Costs: Return shipping is the responsibility of the customer unless the item arrived damaged or defective.
Have questions about a specific build? Click here to contact the shop.
