- 1-807-228-1532
- support@dnb3d.ca
- Free Shipping Orders over $175
- Conditions Apply
Compact 16T GT2 Timing Pulley in black finish for accurate belt-driven motion in 3D printers, CNC machines, robotics, laser engravers, and custom DIY motion systems.
$5.29
The 16T GT2 Timing Pulley is a compact belt motion component used in 3D printers, CNC machines, laser engravers, robotics, plotters, automation projects, and custom mechanical assemblies. Designed for compatible GT2 timing belts, this pulley provides synchronized belt engagement for smooth and repeatable movement in small machine builds.
This black version features a 16 tooth GT2 profile and clean black aluminum-style finish, making it a practical choice for compact printer motion systems, motor shafts, belt reduction layouts, idlers, tensioners, and DIY machine projects. The smaller 16T size is especially useful where space is limited or where a compact pulley diameter is preferred over larger 20T or 80T pulley options.
The 16 tooth format is useful in belt-driven systems where a smaller pulley is needed for compact layouts, motion tuning, or specific machine geometry. Compared with larger pulleys, a 16T pulley can help keep assemblies smaller while still supporting GT2 belt engagement. Always confirm your machine design, belt path, steps-per-mm settings, bore size, and pulley spacing before replacing or changing pulley sizes.
GT2 timing belts are widely used in 3D printers and light-duty motion systems because they provide accurate, synchronized belt movement in a compact format. This 16T GT2 Timing Pulley is suitable for compatible GT2 belt systems used in 3D printers, CNC machines, laser engravers, robotics platforms, plotters, camera sliders, and prototype motion assemblies.
This pulley can be used in CoreXY printers, Cartesian printers, custom 3D printer builds, CNC axes, laser engraver upgrades, robotics mechanisms, small belt tensioners, motor drive assemblies, and compact automation projects. A properly installed pulley helps reduce belt slip, tracking problems, uneven belt wear, and noisy motion.
The black finish gives the pulley a clean, professional look that pairs well with black fasteners, aluminum extrusion frames, printed brackets, and custom machine hardware. This makes it useful for finished printer builds, CNC upgrades, robotics projects, and clean-looking DIY assemblies where appearance matters as well as function.
For related parts, browse the 3D Printer Parts category or the Fasteners category. This pulley can be paired with GT2 timing belts, metric socket head screws, spacers, bearings, linear rails, guide blocks, smooth rods, and other motion hardware from dnb3D.
Timing belt pulley systems are commonly used where synchronized belt motion, repeatability, and compact mechanical drive layouts are needed. For general engineering context on synchronous timing belt systems, see this synchronous belt drive reference.
Every order is hand-inspected and precision-shipped from dnb3D in Marathon, Ontario. Whether you are repairing a 3D printer, building a compact belt drive, assembling a CNC axis, or designing a custom motion system, this 16T GT2 Timing Pulley provides a reliable compact pulley option for GT2 belt systems.
The 16T GT2 Timing Pulley is designed for compatible GT2 timing belt motion systems used in 3D printers, CNC projects, robotics, laser engravers, and custom machine assemblies.
| Product Type | GT2 synchronous timing pulley / belt drive pulley |
|---|---|
| Tooth Profile | GT2 |
| Tooth Count | 16 tooth / 16T |
| Compatible Belt Type | GT2 timing belt |
| Compatible Belt Width | Commonly used with 6mm GT2 belt systems; confirm your specific build requirements |
| Bore Size | 5mm |
| Compatible Belt Width | 6mm | Material | Aluminum / aluminum alloy, if confirmed |
| Finish / Colour | Black |
| Common Use | Drive pulley, motor pulley, belt drive systems, synchronized motion, printer motion hardware, CNC motion, robotics, and automation |
| Compatible Hardware | Compatible motor shafts, shafts, axles, set screws, spacers, collars, brackets, and custom pulley mounts |
| Common Applications | 3D printers, CoreXY printers, Cartesian printers, CNC machines, robotics, laser engravers, plotters, camera sliders, automation projects, and belt-driven motion assemblies |
| Installation Style | Mounted on compatible shaft or motor shaft as part of a GT2 belt drive system |
| Assembly Warning | Confirm belt width, bore size, tooth profile, shaft fit, alignment, and clearance before installation. Misalignment can cause belt wear, noise, slipping, or poor motion quality. |
| Fulfillment | Hand-inspected and precision-shipped from dnb3D in Marathon, Ontario, Canada |
Before installing the 16T GT2 Timing Pulley, confirm that your belt is a compatible GT2 timing belt and that your shaft, motor shaft, or axle hardware matches the pulley bore. Mismatched parts can cause wobble, slipping, binding, poor belt tracking, or premature wear.
If you are replacing a pulley with a different tooth count, confirm your machine firmware, steps-per-mm, belt path, and motion settings before use. A 16T pulley may change motion calibration compared with a 20T or larger pulley depending on the machine design.
Proper pulley alignment is important for smooth and accurate motion. The pulley should sit square to the belt path so the belt tracks evenly across the teeth. Misalignment can cause belt edge wear, noise, skipped motion, uneven tension, or rubbing against nearby parts.
If your pulley uses set screws, tighten them against the proper shaft surface or flat where applicable. Use moderate torque and avoid stripping the set screw or damaging the shaft. For high-vibration printer and CNC applications, removable threadlocker may be used if compatible with your build.
Make sure spacers, washers, collars, brackets, and printed parts do not rub against the rotating pulley or belt. The pulley should spin freely after installation with no side binding, shaft wobble, or interference.
Use reasonable belt tension for your machine design. A belt that is too loose can skip or produce inaccurate motion, while a belt that is too tight can increase bearing load, create noise, wear the belt, or strain motor shafts and brackets.
Keep the pulley teeth and belt path free from dust, chips, filament debris, grease buildup, and abrasive particles. Contamination can reduce belt life and create rough or noisy motion. Inspect the pulley during regular printer or machine maintenance.
To keep the black finish clean, avoid abrasive tools, harsh cleaners, and unnecessary scratching during installation. Wipe with a soft cloth before final assembly if the pulley will be visible on the finished machine.
Every order is hand-inspected before shipping. dnb3D precision-ships pulleys, fasteners, motion parts, and small machine hardware across Canada from our Ontario facility, helping makers, builders, and machine owners receive clean, usable parts ready for careful installation.
At dnb3D, we don’t just ship boxes—we manufacture solutions. Operating our Industry 4.0 micro-factory in Marathon, Ontario, means your order is handled by the same people who design and test these components.
Ready to Ship (3D Printer Parts & Hardware): Finished, inspected, and on the shelf. Dispatched within 1 to 2 business days.
In-House Manufacturing (Laser, Plasma, 3D Prints): These items are manufactured “fresh” to order. Please allow 3 to 5 business days for precision cutting and finishing.
Custom Projects: Bespoke designs require a consultation and a locked-in timeline before production begins.
We ship nationwide across Canada and the USA. Centrally located on the North Shore of Lake Superior, we are uniquely positioned to get your products moving quickly to either coast.
We stand behind every weld, cut, and print. If a product doesn’t meet your expectations, contact the Hub within 30 days. If we wouldn’t put it in our own shop, we won’t let it sit in yours.
Standard Items: Contact us within 30 days for return authorization. Items must be in original, unused condition.
Custom/Personalized Orders: Digitally fabricated to your exact specs (names, custom dimensions, or unique finishes) are final sale once production begins.
Shipping Costs: Return shipping is the responsibility of the customer unless the item arrived damaged or defective.
Have questions about a specific build? Click here to contact the shop.
