- 1-807-228-1532
- support@dnb3d.ca
- Free Shipping Orders over $175
- Conditions Apply
Precision 12mm M5 Threaded Steel Ball for decorative feet, lamp bases, jewelry boxes, display stands, RatRig-style printer hardware, jigs, fixtures, and custom mechanical assemblies.
$2.49
50 in stock
The 12mm M5 Threaded Steel Ball is a versatile hardware component used for decorative feet, lamp bases, jewelry boxes, display stands, small furniture projects, printer hardware, locating points, jigs, fixtures, and custom mechanical assemblies. With a smooth 12mm steel ball and an M5 threaded mount, this part works well anywhere a rounded contact point, finished metal foot, or compact threaded ball support is needed.
This threaded steel ball is useful for both functional and decorative projects. It can be used as a small foot under a lamp base, jewelry box, display stand, electronics enclosure, handmade wooden box, laser-cut project, or decorative panel. It can also be used in mechanical builds where a rounded point of contact is useful for alignment, support, spacing, or repeatable positioning.
The polished ball shape gives projects a clean, finished look while also lifting the base slightly off the surface. This makes the 12mm M5 Threaded Steel Ball a practical choice for decorative hardware, handmade products, woodcraft, laser-cut boxes, small stands, signage bases, and custom display pieces. When paired with an M5 threaded insert or nut, it can create a removable and adjustable foot for many small projects.
This part can also be used in RatRig V-Core 3.1 style printer builds and similar 3-point build plate anchor systems where a 12mm ball with an M5 thread is required. In these setups, the ball can act as a rounded contact point for bed support, location, or kinematic-style mounting. Always confirm your printer version, bed plate, and anchor hardware before ordering replacement parts.
The M5 thread allows the ball to install into compatible tapped holes, threaded inserts, T-nuts, coupling nuts, brackets, plates, and custom mounting hardware. For 3D printed parts or wooden projects, an M5 threaded insert or embedded nut can provide a stronger and cleaner installation than threading directly into the material.
A threaded steel ball provides a smooth rounded contact surface. This can be useful for adjustable feet, alignment points, fixture contact points, removable plates, positioning jigs, mechanical supports, and custom shop-built tools. Compared with a flat screw head, the ball shape can create a cleaner point of contact and a more finished appearance.
For related assembly parts, browse the Fasteners category. You may also want to pair this part with Metric Socket Head Screws, Hammerhead T-Slot Nuts, or related printer and machine-building components in the 3D Printer Parts category.
Threaded ball hardware is commonly used where a rounded contact point, decorative foot, or adjustable support is needed. For general hardware selection context, see this ball feet and threaded ball hardware reference.
Every order is hand-inspected and precision-shipped from dnb3D in Marathon, Ontario. Whether you are building a lamp, finishing a jewelry box, adding feet to a display base, repairing a RatRig-style printer, or creating a custom fixture, this 12mm M5 Threaded Steel Ball provides a clean and reliable hardware solution.
The 12mm M5 Threaded Steel Ball is a versatile threaded hardware component used for decorative feet, bases, printer hardware, jigs, fixtures, and custom mechanical assemblies.
| Product Type | Threaded steel ball / decorative foot / ball contact hardware |
|---|---|
| Ball Diameter | 12mm |
| Thread Size | M5 |
| Size Format | 12mm ball with M5 thread |
| Finish | Polished steel / chrome-style finish |
| Common Decorative Uses | Lamp feet, jewelry boxes, display bases, small furniture projects, woodcraft, laser-cut boxes, stands, and enclosures |
| Common Mechanical Uses | 3D printer hardware, RatRig-style bed anchor systems, jigs, fixtures, locating points, adjustable supports, and custom machine assemblies |
| Installation Style | Threaded installation into compatible M5 tapped holes, inserts, nuts, or mounting hardware |
| Compatible Materials | Wood, 3D printed parts with inserts, aluminum brackets, steel plates, tapped holes, threaded inserts, and custom fabricated assemblies |
| Assembly Warning | Do not cross-thread or over-tighten. Confirm fitment with your project, insert, nut, or mounting hardware before installation. |
| Fulfillment | Hand-inspected and precision-shipped from dnb3D in Marathon, Ontario, Canada |
The 12mm M5 Threaded Steel Ball should be installed into a clean M5 threaded insert, nut, tapped hole, or compatible mounting point. Start the thread by hand whenever possible to avoid cross-threading.
For wood projects such as lamp bases, jewelry boxes, display stands, and decor pieces, use a compatible M5 threaded insert or embedded nut. For 3D printed parts, use a heat-set insert or captive nut for better strength and repeatable assembly.
Before final installation, confirm the installed height, clearance, and contact point. If using multiple balls as feet, make sure all mounting points are even so the finished project sits level.
Use light, controlled tightening. Over-tightening can damage the thread, strip inserts, deform softer materials, crack printed parts, or make future removal difficult.
Keep the ball surface clean and free from abrasive dust, chips, glue, finish residue, or metal debris. If used as a visible decorative foot, wipe with a soft cloth during final assembly.
If the steel ball will contact delicate furniture, glass, painted surfaces, or finished wood, consider adding a small felt pad, rubber bumper, or protective surface underneath the final product.
Every order is hand-inspected before shipping. dnb3D precision-ships fasteners, printer hardware, and small mechanical components across Canada from our Ontario facility, helping makers, builders, and fabricators receive clean, usable parts ready for careful installation.
At dnb3D, we don’t just ship boxes—we manufacture solutions. Operating our Industry 4.0 micro-factory in Marathon, Ontario, means your order is handled by the same people who design and test these components.
Ready to Ship (3D Printer Parts & Hardware): Finished, inspected, and on the shelf. Dispatched within 1 to 2 business days.
In-House Manufacturing (Laser, Plasma, 3D Prints): These items are manufactured “fresh” to order. Please allow 3 to 5 business days for precision cutting and finishing.
Custom Projects: Bespoke designs require a consultation and a locked-in timeline before production begins.
We ship nationwide across Canada and the USA. Centrally located on the North Shore of Lake Superior, we are uniquely positioned to get your products moving quickly to either coast.
We stand behind every weld, cut, and print. If a product doesn’t meet your expectations, contact the Hub within 30 days. If we wouldn’t put it in our own shop, we won’t let it sit in yours.
Standard Items: Contact us within 30 days for return authorization. Items must be in original, unused condition.
Custom/Personalized Orders: Digitally fabricated to your exact specs (names, custom dimensions, or unique finishes) are final sale once production begins.
Shipping Costs: Return shipping is the responsibility of the customer unless the item arrived damaged or defective.
Have questions about a specific build? Click here to contact the shop.
